DHD Power Cruiser 52/XR Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 60

background image

© 2010 DHD Deubner Hoffmann Digital GmbH

42

Series 52 - 52/XR MADI Router Manual

Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.

3. LED 3 indicates, that routing kernel no. 1 is sending data to the outputs of the upper MADI port. This LED is blinking if

the first kernel starts malfunctioning. That means, the first kernel should send data to the outputs of the upper MADI
port, but it does not. If a second, redundant routing kernel is available, LED 4 indicates, that the second routing kernel
is operating now.

4. Normally, the first kernel should send data to the outputs of the upper MADI port. If the first kernel is malfunctioning,

LED 4 indicates, that routing kernel no. 2 is sending data to the outputs of the upper MADI port.

5. The LED indicates, that routing kernel no. 1 is locked to the inputs of the upper MADI port.

6. If a redundant kernel is installed, this LED indicates, that routing kernel no. 2 is locked to the inputs of the upper MADI

port.

7. LED 7 indicates, that routing kernel no. 1 is sending data to the outputs of the lower MADI port. This LED is blinking if

the first kernel starts malfunctioning. That means, the first kernel should send data to the outputs of the lower MADI
port, but it does not. If a second, redundant routing kernel is available, LED 8 indicates, that the second routing kernel
is operating now.

8. Normally, the first kernel should send data to the outputs of the lower MADI port. If the first kernel is malfunctioning,

LED 8 indicates, that routing kernel no. 2 is sending data to the outputs of the lower MADI port.

9. The LED indicates, that routing kernel no. 1 is locked to the inputs of the lower MADI port.

10. If a redundant kernel is installed, this LED indicates, that routing kernel no. 2 is locked to the inputs of the lower MADI

port.

«
...
43
44
45
46
47
...
»

Содержание 52/XR





























































Отзывы:

Нет отзывов

Похожие инструкции для 52/XR

Бренд: NETGEAR Страницы: 169

Бренд: Lancom Страницы: 25

Бренд: Allied Telesis Страницы: 22

ER3-100 (5K02-55)

Бренд: 8e6 Technologies Страницы: 74

Бренд: Abocom Страницы: 1

Бренд: Justec Страницы: 61

Бренд: Patton electronics Страницы: 9

Бренд: Qlogic Страницы: 8

Бренд: Gira Страницы: 6

Бренд: Grundig Страницы: 24

Бренд: Infoblox Страницы: 13

Бренд: Comelit Страницы: 19

Бренд: Compro Technology Страницы: 2

Бренд: Korenix Страницы: 25

Бренд: Zhone Страницы: 2

Бренд: National Instruments Страницы: 26

Бренд: Airvana Страницы: 90

Бренд: TRENDnet Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды