Version 1.14.0 - 14.04.2010
25
Configuration and Operation of an 52/XR MADI Router
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
Important
You need at least 3 modules to operate an 52/XR MADI Router. These modules
are inserted into the DSP Frame I/O layout by default.
·
Slot 1: 52-6710 Sync Module
·
Slot 2: 52-6850 Communication Controller
·
Slot 9: 52-6440 Router Kernel
You are allowed to change the type of the preconfigured router kernel (type
52-6442 supports 2048 channels, type 52-6440 supports 4096 channels), but at
least one routing kernel is necessary for operation.
For each of these preconfigured, essential modules, you can configure a
redundant module in the designated slot of the DSP frame.
Inserting a redundant module into the DSP Frame I/O does not automatically
enable the redundancy for this part of the system. Make sure to insert redundant
hardware into your frame, too.