Version 1.14.0 - 14.04.2010
17
Connecting the Device to a PC
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
Mail Server
This text field has no function yet and does not need to be filled in.
Time Server
Series 52 systems run with an internal system time which can be synchronised to a time server (NTP - Network Time
Protocol). For this, please enter the IP address of your time server in the text field
Time Server
.
If you cannot see the device in the list (b)
1. Click on the
Device
command in the menu.
2. Select the
Network Config...
command from this menu.
3. The
Network Config
window will open; all its text fields are empty.
Enter the serial number of the device, for which you want to change the IP
configuration, in the "Network Config" window.
4. Enter the serial number of the device into the
Serial No
text field. Hit the
Retrieve Current
button afterwards.
This will send a query into the network, searching for network devices outside
of the subnet. If the 52/XR MADI Router
should be located outside of the subnet of the PC, it will answer anyway and transmit its current IP settings. The settings
are then displayed in the
Network Config
window, where you can change them.
You can change the data according to the principle described in the section "If you can see the device in the list (a)". The
process is completed when you send the changed data to the device by hitting the
Send
button.
