manualshive.com logo in svg

DH Instruments ADCS-601, Руководство по эксплуатации и обслуживанию

DH Instruments ADCS-601 - высокоточный прибор для измерения давления, температуры и расхода жидкостей. Для правильной эксплуатации рекомендуется загрузить Operation And Maintenance Manual, который можно скачать бесплатно с manualshive.com. Надежная работа прибора обеспечена благодаря регулярной профилактике и обслуживанию согласно инструкции.

Поделиться
Скачать
background image

 

4.  OPERATION 

 

Page 85 

© 2005 DH Instruments, Inc. 

4.4.1.3

 

SETTING UP SUPPORT DEVICES 

 

 

ADCS Tools uses the engine of COMPASS for Pressure

®

 calibration software to 

manage automated testing using ADCS-601.  The Support Device Editor is a 
COMPASS for Pressure Device Editor.  See the COMPASS for Pressure User’s 
Manual for complete information on Device Editors and Support Device 
Definitions.  The COMPASS for Pressure manual is an on-line manual available by 
pressing the [?] button, when available, in COMPASS features.  It can also be 
accessed on the ADCS-601 system controller in the COMPASS for Pressure 
program group reached using the Windows START button, Programs. 

 

All devices that are not specifically DUTs are considered support devices.  
Support devices are setup in Support Device Definitions using the Support 
Device Definition Editor.  Device Definitions define support devices that measure 
and produce outputs as well as devices that control in response to target sets.  A 
Support Device Definition can also allow the device to act as a DUT to allow it to 
be tested and calibrated without having to set it up separately as a DUT.  A 
single support device can provide multiple final outputs and final sets. 

The Support Device Editor provides features to create, edit, view and remove 
Support Device Definitions from the 

ADCS Tools

 database.  Access the Support 

Device Editor by pressing 

[Setup], [Support Device] 

or the 

Main Toolbar

 

[Device Definition Editor]

 button.  When selected, the last accessed Support 

Device Definition displays.  To edit an existing Support Device Definition, use the 
Editor Toolbar buttons to select the desired definition.  Then simply edit the 
desired fields.  Press the 

Editor Toolbar

, 

[Save] 

button to save the changes.   

Sample Support Devices are already included in the Support Device database as 
examples. 

4.4.1.4

 

TEST OPTIONS (DATA OPTIONS) 

 

 

ADCS Tools uses the engine of COMPASS for Pressure

®

 calibration software 

to manage automated testing using ADCS-601.  The Test Options 
supported by ADCS Tools are COMPASS for Pressure features.  See the 
COMPASS for Pressure User’s Manual section on [Tools], [Options] for 
complete information on ADCS Tools Test Options tabs.  The COMPASS for 
Pressure manual is an on-line manual available by pressing the [?] button, 
when available, in COMPASS features.  It can also be accessed on the   
ADCS-601 system controller in the COMPASS for Pressure program group 
reached using the Windows START button , Programs. 

 

ADCS Tools 

allows preferences to be set concerning how data is collected and 

displayed when running automated tests and operations that occur to conclude a 
test.  These preferences are set using 

[Tools]

, 

[Test Options]

.  

The 

[Test Options] 

form includes five tabs whose functions are describe below. 

[Data Grid] Tab

 

The 

[Data Grid]

 tab is used to customize the 

Data Grid Run Screen

 that is 

available while running tests.  The grid can be customized to display only the 
desired data field columns while suppressing other columns.  The order of the 
columns can also be changed.  Any test data item logged in the Data File can be 
included in any column of the 

Data Grid Run Screen

 by using the correct 

Содержание ADCS-601















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ADCS-601

MacDon C Series Unloading And Assembly Instructions preview
C Series
Бренд: MacDon Страницы: 17
Olympus C Series Instructions Manual preview
C Series
Бренд: Olympus Страницы: 50
VAHVA C Series Operating And Safety Manual preview
C Series
Бренд: VAHVA Страницы: 19
Makita EN5550SH Parts Breakdown preview
EN5550SH
Бренд: Makita Страницы: 10
BANDELIN Sonopuls HD 4050 User Instructions preview
Sonopuls HD 4050
Бренд: BANDELIN Страницы: 48
Mainca RC-100 Manual preview
RC-100
Бренд: Mainca Страницы: 21
Daktronics HS-200 Owner'S Manual preview
HS-200
Бренд: Daktronics Страницы: 30
DAKOTA ULTRASONICS PR-82 Operation Manual preview
PR-82
Бренд: DAKOTA ULTRASONICS Страницы: 28
Haki 564 User Manual preview
564
Бренд: Haki Страницы: 24
Dakota Digital VHX-66F-BRO Installation preview
VHX-66F-BRO
Бренд: Dakota Digital Страницы: 5
Eagle Eye SG-1000 User Manual preview
SG-1000
Бренд: Eagle Eye Страницы: 21
Labomed Magna User Manual preview
Magna
Бренд: Labomed Страницы: 67
Nemalux LS Series Manual preview
LS Series
Бренд: Nemalux Страницы: 6
OBDLink LX Quick Start Manual preview
LX
Бренд: OBDLink Страницы: 2
Madsen zodiac Reference Manual preview
zodiac
Бренд: Madsen Страницы: 206
Vapotherm precision flow Operating Instructions Manual preview
precision flow
Бренд: Vapotherm Страницы: 32
Vanguard Instruments EZCT Operating Procedures Manual preview
EZCT
Бренд: Vanguard Instruments Страницы: 47
Ironton 41725 Owner'S Manual preview
41725
Бренд: Ironton Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды