DFI TPC150-SD Скачать руководство пользователя страница 34

Страница: 34 / 66

Chapter 7 BIOS Setup

www.dfi.com

Chapter 7

ACPI Settings

This section configures system’s ACPI parameters.

CPU Configuration

This section configures the CPU.

Intel

SpeedStep™

Enable or disable the Enhanced Intel SpeedStep

Technology, which helps optimize the

balance between system’s power consumption and performance. After it is enabled in the

BIOS, you can take advantage of its offering by setting power schemes from the operating

system’s power options.

Turbo Mode

Enable or disable processor turbo mode, which allows the processor core to automatically

run faster than the base frequency by taking advantage of thermal and power headroom.

Note this option is not available on the Core

™

i3 processor.

CPU C States

Enable or disable CPU Power Management. It allows the CPU to go to C states when it’s

not 100% utilized.

Hyper-Threading

Enable Intel

Hyper-Threading Technology (HT) on the processor to improve performance

of operating systems and software that are optimized for hyper-threading technology.

Please check the software specifications to determine if enabling HT can be advantageous

to the overall system performance. Note this function is not available with the Intel

Core™ i5-6500, Pentium

G4400 and Celeron

G3900 processors.

Wake on LAN

Enable or disable WOL (wake-on-LAN) to wake the system through an Ethernet adapter.

Wake on PS/2

Enable or disable the use of a PS/2 device to wake the system.

After G3

This field is to specify which state the system should be in when power is re-applied after

a power failure (G3, the mechanical-off, state).

Always On

The system is powered on.

Always Off

The system is powered off.

Wake on RTC

Automatically power the system on at a particular time every day from the real-time clock

battery. Specify the wake up time of the day below: <hour>, <minute>, <second>.

Содержание TPC150-SD



































































Результаты поиска

Содержание TPC150-SD

Отзывы:

Похожие инструкции для TPC150-SD

Бренды по названию

Популярные бренды

DFI TPC150-SD, Руководство пользователя

Результаты поиска

Содержание TPC150-SD

Отзывы:

Похожие инструкции для TPC150-SD

Бренды по названию

Популярные бренды