DFI TPC150-SD Скачать руководство пользователя страница 12

Страница: 12 / 66

www.dfi.com

Chapter 3 Installing Devices

Chapter 3

Installing a SATA Drive

2. Align the mounting holes of the SATA HDD with the mounting holes on the HDD drive bay

and use the mounting screws included in the HDD drive bay kit to attach the SATA HDD to

the drive bay.

1. Locate the SATA drive bay inside the system and remove the mounting screws that

secure the HDD bracekt to the drive bay.

The system can accomondate two SATA drives. Please use the following procedure to install

SATA drives into the system.

Mounting screws

HDD bracket

SATA drive

Mounting screw

SATA drive bay

HDD bracket

Bracket screw

3. Place the SATA drive (with the HDD bracket) back into the system. Align the mounting

holes on the HDD bracket with the mounting holes on the SATA drive bay and then use the

provided mounting screws to secure the drive in place.

4. Connect one end to the SATA data connector of the SATA drive and the other end to the

SATA data port on the system board. Connect the SATA power connector from the PSU to

the SATA power connector.

Mounting screw

SATA data port

SATA data connector
SATA power connector

Содержание TPC150-SD



































































Результаты поиска

Содержание TPC150-SD

Отзывы:

Похожие инструкции для TPC150-SD

Бренды по названию

Популярные бренды

DFI TPC150-SD, Руководство пользователя

Результаты поиска

Содержание TPC150-SD

Отзывы:

Похожие инструкции для TPC150-SD

Бренды по названию

Популярные бренды