www.dfi.com
31
Chapter 6 Mounting Options
Chapter 6
5. The first and second clamps must be positioned and secured diagonally prior to mounting
the rest of the clamps. Tighten the clamp’s screw using an electric screwdriver by pressing
the white plastic cap onto the back of the panel. The illustration below shows that all
clamps are properly mounted.
296.00
386.00
Slit for mounting the clamp
Mounting clamp
White plastic cap
Note:
The maximum thickness of the panel’s opening (or wall) should be 10 mm for
the clamps to support the panel mount firmly.
