DFI TPC150-SD Скачать руководство пользователя страница 46

Страница: 46 / 66

Chapter 7 BIOS Setup

www.dfi.com

Chapter 7

EFI Boot Menu

Use + and - keys to arrange the priority of the boot devices in the list.

Legacy Boot Menu

Normal

For this option, determine the boot order for the devices within each category. Use the

+ and - key to arrange the priority of the boot type devices in the list. The first device

in the list has the highest boot priority.

Advance

For this option, determine the boot order for all bootable devices. Use + and - keys to

arrange the priority of the detected boot devices in the list. The first device in the list

has the highest boot priority.

Boot Device Priority

This section configures legacy or EFI boot order or both depending on the “Boot Type” selected.

Exit

This section configures the parameters for exiting the BIOS setup utility.

Exit Saving Changes

Select this field and press <Enter> to exit BIOS setup and save your changes.

Load Optimal Defaults

Select this field and press <Enter> to load the optimal defaults.

Discard Changes

Select this field and press <Enter>to exit the BIOS setup without saving your changes.

Save Setting to file

Select this option to save BIOS configuration settings to a USB drive. The operation will

fail if there aren’t any USB devices detected on the system. The saved configuration will

have the DSF file extension and can be used for restoration.

Restore Setting from file

Select this option to restore BIOS configuration settings from a USB drive. Note that this

option will not be available if there aren’t any USB devices detected on the system.

Содержание TPC150-SD



































































Результаты поиска

Содержание TPC150-SD

Отзывы:

Похожие инструкции для TPC150-SD

Бренды по названию

Популярные бренды

DFI TPC150-SD, Руководство пользователя

Результаты поиска

Содержание TPC150-SD

Отзывы:

Похожие инструкции для TPC150-SD

Бренды по названию

Популярные бренды