74
3
BIOS Setup
PS2KB Wakeup Select
Hot Key
This option allows you to select the key you
would like to use to power-on the system in the
“PS2KB Wakeup from S3” field.
Password
This option allows you to use a password to wake
up the system from the S3 state. Select this option
and press <Enter>. Enter your password. You can
enter up to 8 characters. Type in exactly the same
password to confirm, then press <Enter>.
Important:
If you forgot the password, you must power-off
the system, unplug the power cord and clear the
CMOS data. Follow the steps in the “Jumper
Settings for Clearing CMOS Data” section in
chapter 2.
The settings on the screen are for reference only. Your version may not be identical
to this one.
3.1.5.11 Delay Prior To Thermal
This field is used to select the time that would force the CPU to
a 50% duty cycle when it exceeds its maximum operating tem-
perature therefore protecting the CPU and the system board
from overheating to ensure a safe computing environment..
3.1.5.12 IRQ/Event Activity Detect
Move the cursor to this field and press <Enter>. The following
screen will appear.
