DFI CH960-CM246 Скачать руководство пользователя

Страница: 63 / 73

www.d

.com

Chapter 7 Intel AMT Settings

Chapter 7

7. Enter a new password in the space provided under Intel(R) ME New Password then press

Enter. The password must include:

• 8-32 characters

• Strong 7-bit ASCII characters excluding

: ,

and

”

characters

• At least one digit character (0, 1, ...9)

• At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. !, $, ;)

• Both lower case and upper case characters

Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.7.1122

[



] =Move Highlight [Enter] =Select Entry [Esc] =Exit

Intel(R) ME New Password

Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.7.1122

[



] =Move Highlight [Enter] =Select Entry [Esc] =Exit

Verify password

6. If you want to change ME password, select

Change ME Password

then press Enter.

Enter the current password in the space provided under Intel(R) ME Password then press

Enter.

Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.7.1122

INTEL(R) ME PLATFORM CONFIGURATION

Change ME Password

FW Update <Enabled>

Intel(R) ME New Password

[



] =Move Highlight [Enter] =Select Entry [Esc] =Exit

Intel(R) ME Password

Change ME Password

FW Update <Enabled>

Intel(R) ME New Password

Change ME Password

FW Update <Enabled>

Intel(R) ME New Password

9. Select

FW Update

then press Enter. Select

Enabled

Disabled

Password Pro-

tected

then press Enter.

Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.7.1122

Change ME Password
FW Update

[



] =Move Highlight <Enter> =Complete Entry [Esc] =Discard Changes

Disabled
Enabled
Password Protected

INTEL(R) ME PLATFORM CONFIGURATION

8. You will be asked to verify the new password. Enter the same new password in the space

provided under Verify Password then press Enter.

INTEL(R) ME PLATFORM CONFIGURATION

Содержание CH960-CM246










































































Результаты поиска

Содержание CH960-CM246

Отзывы:

Похожие инструкции для CH960-CM246

Бренды по названию

Популярные бренды

DFI CH960-CM246, Руководство пользователя

Результаты поиска

Содержание CH960-CM246

Отзывы:

Похожие инструкции для CH960-CM246

Бренды по названию

Популярные бренды