DFI CH960-CM246 Скачать руководство пользователя

Страница: 34 / 73

www.d

.com

Chapter 3 BIOS Setup

www.d

.com

Chapter 4 BIOS Setup

Chapter 4

Power & Performance

This section is used to configure the power & performance options.

Allows more than two

frequency ranges to be

supported.

Advanced



Select Screen



Select Item

Enter: Select

+/- : Change Opt.

F1: General Help

F2: Previous Values

F9: Optimized Defaults

F10: Save & Exit

ESC: Exit

[Enabled]

Power & Performance

Intel(R) SpeedStep(tm)

Turbo Mode

C states

Intel(R) SpeedStep(tm)

This field is used to enable or disable the Intel Enhanced SpeedStep Technology. If

enabled, Turbo Mode will appear for configuration.

Turbo Mode

This field is used to enable or disable processor turbo mode (requires that Intel(R)

SpeedStep(tm) is enabled too), which allows the processor core to automatically run

faster than the base frequency when the processor’s power, temperature, and specifi-

cation are within the limits of TDP.

C states

Enable or disable CPU Power Management. It allows CPU to go to C states when it’s

not 100% utilized.

PCH-FW Configuration

This section configures the parameters of Management Engine Technology.

ME State

Manageability Features State

AMT BIOS Features





AMT Con

guration

Uncon

g on RTC Clear





Firmware Update Con

guration

Advanced

[Enabled]



Select Screen



Select Item

Enter: Select

+/- : Change Opt.

F1: General Help

F2: Previous Values

F9: Optimized Defaults

F10: Save & Exit

ESC: Exit

When Disabled ME will

be put into ME Temporar-

ily Disabled Mode.

ME State

When this field is set to Disabled, ME will be put into ME Temporarily Disabled Mode.

Manageability Features State

Enable or disable Intel(R) Manageability features. This option disables/enables Manage-

ability Features support in FW. To disable, support platform must be in an unprovi-

sioned state first.

AMT BIOS Features (for CH960-CM246/QM370 only)

When disabled, AMT BIOS features are no longer supported and user is no longer able

to access MEBx Setup. This option does not disable manageability features in FW.

AMT Configuration (for CH960-CM246/QM370 only)

This section is used to configure Intel(R) Active Management Technology Parameters.

Refer next two pages for more information.

ME Unconfig on RTC Clear

When disabled, ME will not be unconfigured on RTC Clear.

Firmware Update Configuration

This section is used to configure Management Engine Technology Parameters. Refer

page 36 for more information.

Содержание CH960-CM246










































































Результаты поиска

Содержание CH960-CM246

Отзывы:

Похожие инструкции для CH960-CM246

Бренды по названию

Популярные бренды

DFI CH960-CM246, Руководство пользователя

Результаты поиска

Содержание CH960-CM246

Отзывы:

Похожие инструкции для CH960-CM246

Бренды по названию

Популярные бренды