Dexter Laundry DDAD30HC-59 Series Dryers, Руководство оператора

Страница: 14 / 24

14
SWITCHES (Pushbuttons) - continued
Description
This touch pad switch allows the dryer controller to enter the
temporary programming mode.
Cycle
This touch pad switch will stop the dryer during a dry cycle without
clearing the present drying cycle if pressed once. If pressed and
released twice, consecutively, the present dry cycle will be cleared.
Stop
This touch pad switch will start the operation of a dry cycle if
pressed and released once. Pressing and holding this touch pad
switch will display the current temperature of the dryer heat sensor
Start as long as it is held in the depressed position.
4-DIGIT NUMERICAL DISPLAY MESSAGES
Message Description
LOAd This message is displayed after a dry cycle is complete and the dryer
loading door has been opened or the STOP touch pad key on the
dryer controller has been pressed and released twice.
donE This message blinks immediately after completion of the dry cycle
and continues to blink until the stop key on the dryer controller
touch pad is pressed or the dryer loading door is opened.
Prog This message is displayed when entering the permanent
programming mode.
.15 This message appears while the dryer is in the heating time of a dry
cycle. The decimal point will blink if the output for the gas valve is
on, or remain on constantly if the output for the gas valve is not on.
The number represents the total time left in the dry cycle (includes
cool down time).
C02 This message appears when the cool down time of the dry cycle is
reached. The letter “C” represents the cool down (non-heating) part
of the dry cycle. The number(s) after the letter “C” represent(s) the
total time remaining in the dry cycle.
F5 This message appears if there is a dryer fault. The letter “F”
indicates a fault and the number after the “F” represents the specific
fault that has occurred. There are five different faults that can
appear (F1 through F5).