manualshive.com logo in svg

Dexter Laundry DDAD30HC-59 Series Dryers, Руководство оператора

Поделиться
Скачать
Dexter Laundry DDAD30HC-59 Series Dryers Скачать руководство пользователя страница 13

 
 

13 

TOUCH PAD DESCRIPTION

 

 
INDICATOR LIGHTS (L.E.D.s)

 

Description 

 

Cycle (1 through 5)   

These L.E.D.s are on solid when a particular cycle is chosen for 
operation or programming. 

 
Gas Valve 

This L.E.D. is part of the 4-digit numeric display and will be on 
solid during the drying part of a cycle when the gas valve does not 
need to be on.  The L.E.D. will be blinking when the gas valve 
needs to be on.  The L.E.D. will not be on solid or blinking (off) if 
the cycle is stopped, complete, in cool down, or terminated. 

 
Programming   

 

These L.E.D.s are on solid as they are selected during the 
programming of the dryer controller. 

 
Stop 

This L.E.D. is on solid when either the STOP button is pressed once 
or the door is opened during an operating cycle. 

 

SWITCHES (Pushbuttons) 

 

 

 

 

 

 

 

 

Description 

 

 

This touch pad switch will increment  (increase) dry time, cool 
down time, and drying temperature.  It will also scroll upwards 
when 

   Up/Increase 

selecting a dry cycle. 

 
 

 

This touch pad switch will decrement (decrease) dry time, cool 
down time and drying temperature.  It will also scroll downwards 

 Down/Decrease 

when selecting a dry cycle. 

 
 

 

This touch pad switch allows the dryer controller to enter the 
permanent programming mode. 

       Program 
 

This touch pad switch will select one of the three variable parts of 
the dry cycle (dry time, temperature, or cool down) by sequencing 
through them.  Once one of the variable parts of the dry cycle is 

 

     

Select/Enter  

 

 

chosen and changed, this touch pad switch will enter the new 
(changed) value into the dry cycle program. 

 
 

Содержание DDAD30HC-59 Series Dryers

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды