7
GB
[
Flush mount box
]
Cable opening
A
Fixing clip
S
Retaining screw 1
Technical data
Indoor unit
Operating voltage:
230 V ~ 50 Hz
Current consumption: max. 6 W
Mains connection:
approx. 1.5 m mains cable
with mains plug (3 Amp
Fuse fitted)
Output voltage:
12 V DC (for door release)
Operating current:
max. 1 A * (for door release)
Tonal sequence:
approx. 80 dB (approx. 1 m
distance)
Operating temperature: + 5°C to + 40°C
Dimensions:
approx. 93 x 72 x 230 mm
(w x h x d) (with receiver
and mounting plate)
Housing material:
plastic (ABS)
Weight:
approx. 511 g (approx. 670 g
incl. receiver and mounting
plate)
* The door release must meet these specifications.
Core cross section in relation to length of
cable
Core cross section Max. length
0.5 mm
2
100 m
0.8 mm
2
150 m
1.5 mm
2
200 m
Outdoor unit
Operating voltage:
from indoor unit (7 V DC)
Dimensions:
panel approx.
116 x 200 x 16 mm (wxhxd)
flush mount box approx.
98 x 164 x 40 mm (wxhxd)
Housing material:
plastic (ABS), grey; alumini-
um, matt silver
Weight:
approx. 236 g (approx. 321 g
incl. flush mount box)
IP protection type:
IP 20; for use in dry area
only
Safety instructions
The following instructions are for your own safety
and satisfaction when operating the DP 601 door
intercom. Please note that non-compliance with
these safety instructions can lead to a serious risk
of accident.
Explanation of the symbols and terms used:
Danger!
failure to observe this instruction
endangers life and health.
Caution!
failure to observe this instruction
endangers property.
Tip!
following this advice will help you to
achieve optimal results.
Danger!
• Do not leave small children unsupervised with
the packaging material. There is a risk of fatal
accident by suffocation.
• Do not leave children unsupervised with the
device. There is a risk of fatal accident and injury.
• The door intercom must be isolated from the po-
wer supply for installation and connection.
Otherwise there is a risk of fatal accident by
electric shock.
• Do not damage any gas, electricity, water or
telecommunication lines when fitting the device.
This poses a risk of fatal accident, injury and
damage.
• Never expose the device to fire, heat or to tem-
peratures of over 50° C for any length of time.
There is a danger to life from explosion.
• Handle the cable with care. Install it so that it
cannot get damaged and does not
create a stumbling hazard. This otherwise poses
a risk of fatal accident and injury.
• Never connect any external voltage to the ter-
minal screws
Y
,
U
,
I
,
O
,
u
,
i
. Otherwise
there is a risk of fatal accident, injury and fire.
• Make sure that the plug of the mains cable
T
is pushed completely into the mains socket
when connecting the device.
Never touch it with damp hands. Otherwise
there is a risk of electric shock and fatal accident.
• Use the indoor unit
Q
in dry areas only. Never
allow it to come into contact with water. Do not
Introduction / Safety instructions
Content_Türsprechanlage_GB.indd 7
29.09.2005 17:22:15 Uhr
