Important Safety Instructions
WARNING: When using electric tools, basic safety precautions
should always be followed to reduce risk of fire, electric shock, and
personal injury, including the following:
READ ALL INSTRUCTIONS
Grounding Instructions
This tool should be grounded while in use to protect the operator from
electric shock. The tool is equipped with a 3-conductor cord and 3-
prong grounding type plug to fit the proper grounding type receptacle.
The green (or green and yellow) conductor in the cord is the
grounding wire. Never connect the green (or green and yellow) wire
to a live terminal. If your unit is intended for use on less than 150 V,
it has a plug that looks like that shown in sketch A. If it is for use on
150 to 250 V, it has a plug that looks like that shown in sketch D. An
adapter, sketches B and C, is available for connecting sketch A type
plugs to 2-prong receptacles. The green-colored rigid ear, lug, or the
like, extending from the adapter must be connected to a permanent
ground, such as a properly grounded outlet box. No adapter is
available for a plug as shown in sketch D. ADAPTER SHOWN IN
FIGURES B and C IS NOT FOR USE IN CANADA.
English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY D
E
WALT TOOL, CALL US TOLL FREE AT:
1-800-4-D
E
WALT (1-800-433-9258)
SHAR
PENIN
G INST
RUCTIO
NS
SWIN
GHE
AD
MOD
E
SELE
CTO
R
FEE
D K
NOB
LO
AD
PUS
H
LATC
H
GRIN
D
TO 1
/32"
ENTIRE
LOCA
TOR EDGE
TOUCHING
FLUTE
SHARPEN/DRESS
SELECTOR
FEED KNOB
INDEX SLEEVE
SWINGHEAD
CHUCK
LOCATOR
GRINDING
WHEEL
LATCH
EYE SHIELD
WHEEL
COVER
DRESS KNOB
DUST SHIELD
DIAMOND
DRESSER
GUARD BAND
ADJUSTMENT
SCREW
ON/OFF
MOTOR
SWITCH
A
B
C
D
GROUNDING PIN
GROUNDED
OUTLET
BOX
GROUNDING
MEANS
GROUNDING PIN
ADAPTER
DW751/385103 5/2/02 12:51 PM Page 4
