DeWalt D28754, Инструкция по эксплуатации, Страница: 9 / 36

English
7
Tool Co., 701 East Joppa Road, Towson, MD 21286, call
1-800-4-
D
e
WALT (1-800-433-9258) or visit our website:
www.dewalt.com.
Installing Abrasive Wheels (Fig. D, E)
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury.
1. Lay unit on a firm surface with bottom of shoe 5
facing up.
2. Loosen depth adjustment wing nuts 3 , move shoe to
allow easiest access to spindle nut, then tighten wing
nuts to hold shoe in place.
3. Using supplied 1–1/8” (28 mm) open end wrench,
remove spindle nut
9
, outer clamp washer
10
and
used wheel 11 if one is installed. Hold spindle from
turning with spindle lock button. Spindle threads are
right hand.
4. Make sure inner clamp washer 12 is in place and ears
are engaged with spindle flats. Slip wheel through
bottom of shoe and slip wheel over spindle. Be sure
wheel goes over pilot diameter of inner clamp washer.
Slip on outer clamp washer. Start threading on spindle
nut which will self align outer clamp washer.
5. Engage spindle lock button and tighten nut with
wrench. Do not over tighten spindle nut.
6. Turn wheel by hand to ensure it is properly centered.
The wheel should not hit the shoe, guard or nut. The nut
and flanges should be tight.
7. Be sure to readjust shoe for proper depth of cut.
CAUTION: Only use 12” (305 mm) Type 1/41 wheels
with 1” (25.4 mm) arbor hole with this tool. Never
force a wheel onto the machine or alter the size of the
arbor hole.
Depth of Cut (Fig. A, F, G)
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
Fig. E
3
Fig. D
11
12
9
10
8
13
5