Configuration
By clicking the configuration link it's possible to configure the ETH8020 IP address and subnet mask together with the
ability to set a password for entry to control screens. Gateway address and DNS address is configurable and is used
with mapped inputs which are described in section below. The configuration page also offers the option to set a
password that will be required to change any of the relay states or digital outputs using TCP IP commands, this is
explained in the TCP/IP password section. All settings are saved to memory so be careful to remember the username
and password! Default password settings are shown in the picture below. Version 2 now offers a latched outputs option,
this will automatically save any permanent output changes (not pulsed) and restore them following power loss.
© Devantech Ltd 02/07/19
ETH8020 Documentation
6/17
