DEVA Broadcast DB2003, Инструкция по техническому обслуживанию и эксплуатации

Страница: 42 / 71

- 42 -
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
SNMP
SNMP is a convenient way of integrating the DB2003 into systems for automatic monitoring and
control of multiple transmitters. It can be used with the help of a free Android application to check
on the status or apply additional settings to the transmitter through a smartphone when the time or
location is inconvenient.
This Guide uses screenshoots from iReasoning MIB Browser Personal Edition – a free-of-charge
version of an excellent software tool of sufficient functionality.
SNMP AGENT
For SNMP to work, SNMP Agent must be Enabled and the respective ports must be routed. Go
to Settings> Device> SNMP Agent to set as Manager IP the IP address of the computer which is
running the trap receiver.
Set an appropriate value for Agent ID in order to be able to identify the sender in the case of
several DB2003’s sending traps to the same receiver.
With the [Test Trap] button, you can check the negotiability of the entire route.
DB2003 uses SNMP v.2, with Read/Write Community serving as a password for granting reading
and writing access respectively. Default values are shown. It is recommended those should be
changed for security reasons.