DEUTZ-FAHR CondiMaster 6831, Руководство по эксплуатации

Страница: 31 / 38

29
EN
5 Maintenance
Danger!
All jobs to be carried out only when
engine switched off and machine at a
standstill. Remove the ignition key!
5.1 Inspection
After approx. 5 operating hours, check the Rotary
Tedder thoroughly. All screws, particularly those
fastening the spring-mounted tines, rotary unit arms and
wheels, must be checked and tightened where
necessary.
TTTTTor or or or orqqqqques: ues: ues: ues: ues:
z Spring-mounted tines = 120 Nm
z Rotary unit arms, outside = 120 Nm
z Rotary unit arms, inside = 155 Nm
z Wheels = 20 Nm
5.2 Caring for the cardan shaft
Regular maintenance results in a long service life.
Check proper functioning of the cardan shaft and the
safety parts every time before use. At the end of the
season, clean and lubricate all parts thoroughly.
5.3 Winter storage
Before putting the implement into winter storage, the
following work must be done:
z Clean the implement thoroughly
z Check all screwed connections and tighten all
screws
z
Repair or replace all damaged parts
z Repair any damage to the paintwork
z Lubricate the implement according to the lubrication
diagram
z
Check tyre pressure
after after after after after
5 operating hours
5 operating hours
5 operating hours 5 operating hours 5 operating hours