DEUTZ-FAHR CondiMaster 6831, Руководство по эксплуатации

Страница: 22 / 38

20
EN
3 Operation
3.1 Mounting on the tractor
Danger!
Work may only be carried out with the
implement at a standstill! Shut down the
engine and remove the ignition key!
z
Attach the Rotary Tedder to the tow bar.
For the optional feature "bottom link For the optional feature "bottom link
For the optional feature "bottom link For the optional feature "bottom link For the optional feature "bottom link
assembly", ensure that the linch pin is locked
assembly", ensure that the linch pin is locked assembly", ensure that the linch pin is locked assembly", ensure that the linch pin is locked assembly", ensure that the linch pin is locked
properly!
properly!
properly! properly!
properly!
z Bottom link height: set to approx. 40 mm from the
ground (fig. 3-1).
z
Attach the Rotary Tedder to the tractor with bolt "A"
and secure it with spring pin (fig. 3-2).
z Connect the cardan shaft to the tractor p.t.o. shaft
z Lock the protecting tube with the chain to prevent it
from rotating
z Connect the four hydraulic remote connections (red
= lateral machines/chassis; bare metal = hydraulic
clearing of the field edges) to two double-acting
control units.
Attention!
Make sure that the hydraulic lines do not
get jammed, scrub or get caught.
z Connect the lighting cables and lay the traction rope
into the tractor cabin.
z Raise the support foot
Attention!
When connecting and disconnecting the
hydraulic lines, adjust the tractor hydraulic
system to "free float".
Fig. 3-1
Fig. 3-2
A