AL-602-03-902 EnoPuck BASIC
Product manual
Page 5 of 19
© DEUTA Controls GmbH
Paffrather Str. 140, 51465 Bergisch Gladbach
Tel.:+49 2202 285 57- 61
06.07.2021
Hauptstraße 76, 32479 Hille
Tel: +49 5734 51466 - 0
Technical data might change
www.deuta-controls.dnet
Fax:+49 5734 51466 - 28
1 Validity of this documentation
This documentation is only applicable to the product
AL-602-03-902 EnoPuck BASIC
and is only applicable starting from products with FW/HW Version 1.0/2.0.
The device must only be installed and operated according to the instructions in these
operating instructions.
2 Intended use
The
AL-602-03-902 EnoPuck BASIC
must not be used in any relation with equipment
that supports, directly or indirectly, human health or life or with applications that can
result in danger for people, animals or real value.
The
AL-602-03-902 EnoPuck BASIC
can be put on a tables surface, or even mounted
below a desk using a double-sided adhesive tape. The lens cover can be used to shield
a certain area to avoid an unwanted motion detection. Without the lens cover, detection
range will be 360°, as shown in the following example (green detection area):
Using the lens cover, you can shield half of the area as shown below (yellow
detection area):
