AL-602-03-902 EnoPuck BASIC
Product manual
Page 6 of 19
© DEUTA Controls GmbH
Paffrather Str. 140, 51465 Bergisch Gladbach
Tel.:+49 2202 285 57- 61
06.07.2021
Hauptstraße 76, 32479 Hille
Tel: +49 5734 51466 - 0
Technical data might change
www.deuta-controls.dnet
Fax:+49 5734 51466 - 28
3 Disposal
Electrical and electronic equipment may not be disposed of with
household waste. This also applies to products without this symbol.
Electrical and electronic equipment contain materials and substances
that can be harmful to the environment and health. Electrical and
electronic equipment must be disposed of properly after use.
Note only for EU: WEEE 2012/19/EU applies throughout Europe.
Directives and laws may vary nationally.
4 Device description
4.1 Functionality
The
AL-602-03-902 EnoPuck BASIC
is used to
detect the presence of people working
on a desk by the internal vibration and PIR (passive infrared) motion sensor in the
front.
The integrated radio interface based on EnOcean
®
wireless technology offers the
possibility to integrate this information into any building automation system with an
EnOcean interface. It can also be directly teached in into an EnOcean based actuator.
If vibration or motion is detected, a wireless message will be sent by the integrated
radio transmitter based on the international EnOcean
®
wireless standard.
The technical data of the integrated sensors are as follows:
• PIR sensor: 100 degree opening angle, range 3 to 5 meters
• Vibration: sensitivity 0.05 g
The measured values / events are transmitted via EnOcean. There is no external wired
interface.
The
EnoPuck BASIC
is supplied by two internal 1,5 V AA batteries.
4.2 External product interface
The external product interface consists of the following items:
•
Infrared lens in conjunction with a passive infrared sensor for motion detection
•
Mountable 180° lens cover, 8 positions in steps of 45°
•
Service button to send teach in / learn telegram
