AL-602-03-902 EnoPuck BASIC
Product manual
Page 14 of 19
© DEUTA Controls GmbH
Paffrather Str. 140, 51465 Bergisch Gladbach
Tel.:+49 2202 285 57- 61
06.07.2021
Hauptstraße 76, 32479 Hille
Tel: +49 5734 51466 - 0
Technical data might change
www.deuta-controls.dnet
Fax:+49 5734 51466 - 28
7 Service / changing batteries
Caution:
When opening the device, you have to take care of
electrostatic discharge. Otherwise, electronics will be damaged.
In case of discharged batteries, they can be replaced with two new AA batteries, 1,5 V.
You have to remove carefully the four screws on the backside of the EnoPuck BASIC
(Tool: Bit T6). Do not touch any electronic components, since you could damage the
device.
8 Safety remarks
CAUTION: Risk of damage or explosion if a battery of incorrect type is
used.
This product contains AA type batteries. If a battery is swallowed, it can
cause severe internal burns in just 2 hours and can lead to death.
