Detection Systems DS7400Xi-AT, Справочное руководство

Страница: 44 / 96

DS7400Xi-AT (Ver. 3+) Reference Guide Copyright © 1995-2000 Detection Systems, Inc. Page 44
11.11 Quick Arm Control Programming: Program Address (0169)
Quick Arm Control programming defines which partitions can
be quick armed (armed without requiring a PIN to be entered).
11.12 Keypad Assignment Programming: Program Addresses (0173-0180)
Keypad Assignment Programming is where you assign the keypad type
and the partition it belongs to.
See Glossary (section 6.6) for further details.
Each keypad must have its own Bus address. This must also be
selected on the keypad via its address pins. See In Guide P/N
25902. One keypad must be selected as keypad 1.
Defaults: The default, if using only one keypad, is an Alpha keypad
belonging to partition one.
* = When in Commercial Fire Mode, certain keypads must have specific assignments (see section 6.11).
** = Keypads 11-15 are connected to the Option Bus. If the DS7412 is connected to the Option Bus (at keypad address 13
or 14), keypad 13 or 14 is unavailable. Similarly, if the DS7420i is connected to the Option Bus at keypad address 15, keypad
15 is unavailable; and if the DS7488 is connected to the Option Bus at keypad address 11-15, the corresponding keypad(s) is
(are) unavailable.
*** = If only using one partition, do not program keypads as Master Keypads. Only program for a Master Keypad if you need to view
multiple partitions from a single keypad.
Data Digit 1 Data Digit 2
Keypad 1*
default = 1
Program Address 0173
Data Digit 1 Data Digit 2
Program Address 0174
Data Digit 1 Data Digit 2
Program Address 0177
Data Digit 1 Data Digit 2
Program Address 0178
Data Digit 1 Data Digit 2
Program Address 0175
Data Digit 1 Data Digit 2
Program Address 0176
Data Digit 1 Data Digit 2
Program Address 0179
Data Digit 1 Data Digit 2
Program Address 0180
Keypad 2
default = 0
Keypad 3
default = 0
Keypad 4
default = 0
Keypad 5
default = 0
Keypad 6
default = 0
Keypad 7
default = 0
Keypad 8
default = 0
Keypad 10
default = 0
Keypad 9
default = 0
Keypad 11**
default = 0
Keypad 12**
default = 0
Keypad 15**
default = 0
Keypad 14**
default = 0
Keypad 13**
default = 0
* * * * *
LCD Backlight Off Until Keypress
Select Options
LCD Backlight Always On
0 1
Alpha (LCD) Keypad
LED Keypad
Select Options 0 1 2 3
Disabled
Master Keypad
***
Data Digit
1 2
Backlight selection affects all LCD keypads