Detection Systems DS7400Xi-AT, Справочное руководство

Страница: 47 / 96

DS7400Xi-AT (Ver. 3+) Reference Guide Copyright © 1995-2000 Detection Systems, Inc. Page 47
11.17 Commercial Fire Mode Programming: Program Address (0186)
This section describes how to define the parameters for
the Commercial Fire Mode.
See Glossary (section 6.11) for further details.
When programming Fire zones, it is recommended that they be zone functions 12 and 13 (see sections 11.2 and 11.17.3).
11.17.1 When Central Station Commercial Fire Mode is chosen, address 1520 (DS7420i: Dual Phone Line/Bell Supervision Module
Output Programming), will be forced to a value of 5.
11.17.2 When Local Commercial Fire Mode is chosen, address 1520 (DS7420i: Dual Phone Line/Bell Supervision Module Output
Programming),will be forced to a value of 3, 4, or 5. (Turns the Bell Monitor feature ON and the Alarm Output on Line Fault feature
OFF)
11.17.3 Regardless of which Commercial Fire Mode is chosen, the following parameters will be forced when exiting local
programmer’s mode:
• Zone Function 12, address 0012, will be a 7 *0.
• Zone Function 13, address 0013, will be a 7 *1.
• Zone Function 14, address 0014, will be a 7 *2.
• Zone Function 15, address 0015, will be a 7 *3.
• Zone Bypass address 0017 will not allow zone functions 12 - 15 to be bypassed.
• Emergency Key, address 0181, data digit 1, will become a 3 if programmed previously as a 2. Data digit 2 will become a 2 if
programmed previously as a 3.
• Panic Key, address 0182, data digit 1, will become a 2 if programmed previously as a 3.
• Fire Bell Cutoff, address 0195: If less than 5, set to 5, otherwise untouched.
• The AC Fail Report delay will be random between 6-12 hours regardless of the delay time programmed in 0147. Also, the AC Fail
Report will not be sent as a “tag-along.”
11.17.4 In Central Station Commercial Fire Mode, the following communication parameters will be forced:
Report Codes: If 0, the following defaults will be set, otherwise they will be unchanged.
0256
0257
0269
0270
0271
Address
*0 1
7 1
*0 3
*0 4
*0 5
Default
0272
0286
0287
0288
0289
Address
*0 6
7 3
7 4
7 5
7 6
Default
0325
0301
0302
0303
0304
Address
6 9
6 3
6 4
6 5
6 6
Default
0326
0327
0328
0329
0330
Address
7 9
6 *0
7 *0
8 3
7 *5
Default
0331
0334
0335
0336
Address
6 *5
3 9
3 *0
3 9
Default
• Phone Control: If 0, set to 6 1, 4/2 @ 18/23, 10pps, otherwise untouched.
• Test Report: Set to 8, call out every day.