Detection Systems
Abacus User Guide
Chapter 4.28
At this display, press the
3
key to enter the Log.
(Abacus 6/14 + COM
panel do not have a printer, and will miss the next menu by going into
View).
At this displa y, press the
1
key to view the log.
3
key to print out a list of the log events (see System Features).
4
Key to print out the programming. (See System Features).
When in 1 = View, press the
YES/PART
to scroll to previous events (back in time one event), and
NO
key to scroll to the more recent events (forward in time one event).
Version 5000 software or later, the following search facilities are available by pressing the key
indicated:
1
Show additional data if available (i.e. additional zone data).
2
Search backwards, for last Tamper event.
3
Search backwards, for last Alarm event.
4
Search backwards, for last Trouble event. (Abacus 8/80, 15R and 72 only).
5
Search backward, for last Omit event. (On older software, this facility was available
by pressing 2 at the above display.
6
Search backwards, to the last Miscellaneous event (i.e. watchdog).
7
Move forward 10 events in the log.
8
Search backwards, for the last Bad Set event.
9
Move backwards, 10 events in the log.
0/ESC Abort the log mode.
Press the 3 key (3 = List), on panels with print out facility will print out the log.
Version 5000 or later
software, on pressing the 3 key, before print out commences you are given a date range choice:
At this menu, by pressing the
YES/PART
key the complete log can be
printed out. By typing in the dates required, the print out will be over the
period typed in. I.e. by keying in
NO 15 YES/PART 02 YES/PART 12
YES/PART 02 YES/PART,
the print out will be of all events between 12
th
of February and 15
th
February.
Press the
0/ESC
key to abort the printout.
Press the 4 key (4 = Program), on panels with print out facility will print out the User programming
states. (The engineer can print out the complete panel programming).
Press the
0/ESC
key to abort the printout.
At this display, press the
O/ESC
key then the
4
key to return to the Day
mode.
Log Information Explained
Information stored in the log, can either be read from a print out or on the keypad display. If read from
keypad display, additional information may be obtained by pressing the 1 key.
At version 5000 software addition recorded events was added to the log, also each item, where
appropriate, has been increased to three lines. For this reason, it is not possible to indicate in the lo g
information for the changes in software. If the indication you get is slightly different to as below it
1=Prog 2=Test
3=Log
4=Day(
Quit)
1=View
3=List
4=Program
Print Out y/n ?
15/02
…
00/00
1=View
3=
List 4=Program
