Product Information
EN
4 / 28
06/2020
mm
in.
L (BLRTA025-2350-10S)
238
9.37
L (BLRTA025-2350-4Q)
240
9.45
A
48
1.89
B
209
8.23
C
54
2.13
CAD files
For information about the dimensions of a product, see the Dimensional drawings archive:
https://www.desouttertools.com/resource-centre
Overview
General overview
BLRTA tools are e-Pulse cordless pistol nutrunners.
They are hand-held by the operator and powered by a Desoutter battery pack.
On delivery, the tool display is protected by a password.
Tools are delivered with 6 Psets which are configurable from the tool display or from CVI CONFIG.
The last 100 results can be displayed on the computer for analysis with CVIMONITOR.
The last 1000 results can be displayed on the computer for analysis with CVI ANALYZER.
Tool settings can be done via the tool display.
Tool maintenance can be done with eDOCK and CVIMONITOR software.
The setup will mainly depend on the joint hardness and the targeted accuracy.
A pulse tightening is based on a single step including:
- a Rundown speed phase (continuous)
- a Final speed phase (pulse)
The Rundown speed phase has an impact on the first peak amplitude.
The pulse amplitude defines the pulse power. It has an impact on the torque step between two consecutive pulses.
