EN
Service
06/2020
21 / 28
Advanced tool maintenance with ACCESS KEY
Launch CVIMONITOR.
To activate the screens, you need to have an ACCESS KEY USB stick with the right profile (configured with the
Desoutter CVIKEY software).
If not, contact your CVIKEY manager for support.
Motor align
Click this icon.
Click
Motor align
.
It is mandatory to calibrate the tools after a motor align.
It is recommended to align the motor in case of motor, transducer or PCB change.
Before starting, press the trigger and
KEEP IT PRESSED DURING THE COMPLETE PROCESS
. If not, the
tool could be severely damaged.
While pressing the trigger, click
Start motor align
.
The process will run during around 1 minute and will stop automatically.
Click "Stop motor align" to stop the process before the end.
Release the trigger.
Declaring fixed accessories
A fixed accessory mounted on a tool must be declared in this screen.
Click this icon.
Click
Tool identification
.
Select the type of accessory and fill in the parameters.
Click
Write to tool
.
It is mandatory to calibrate the tool equipped with the fixed accessory before use.
Upgrading tool firmware
Click this icon.
Click
Upgrade tool firmware
.
Contact your Desoutter representative to get the last firmware version.
Follow the instructions on screen.
