Desert Star Acoustic Release Control System, Руководство пользователя

Страница: 17 / 67

Battery pack connectors
STEP 6:
Once the battery packs are reconnected to their corresponding power cables, carefully insert each
battery pack back into the body of the ARC station. Make sure to gently “tuck in” the battery
connector cables so that they are not damaged or stressed.
STEP 7:
Locate the sonar transducer end-cap you removed earlier. Reconnect the sonar transducer end-cap
to the corresponding WHITE/BLACK cable. Ensure that the connector on the cable from sonar
transducer end-cap is inserted to the socket on corresponding cable firmly. Once the cable
connection is made, carefully insert the excess cable back in to the body of ARC station using your
fingers.
Before re-inserting the sonar transducer end-cap back in the body of the ARC station, please pay close attention to the
condition of the rubber O-ring stretched around the inner edge of the sonar transducer end-cap. If you notice any debris or
cracks in the structure of the rubber O-ring, pull it from its groove. Remove all the dirt and debris from the groove before
re-installing the rubber O-ring. Please take special care handling the rubber O-ring because it is relatively fragile and can be
damaged by sharp metal objects. Replace O-ring if it is necessary. If you determine that the O-ring needs to be replaced,
contact Desert Star Systems LLC and ask for
Rubber O-ring, Manufacturer: Parker 2-130, Compound E515 (qty 1)
Desert Star Part#: ORI00058.
Before re-installing the rubber O-ring back to its groove on the sonar transducer end-cap, make sure to apply a thin film of
silicone grease.
STEP 8:
With the rubber O-ring properly placed in its groove and stretched around the inner edge of the
sonar transducer end-cap, push/snap the sonar transducer end-cap back into the housing of the
ARC station.