Desert Star Acoustic Release Control System Скачать руководство пользователя

Страница: 13 / 67

Due to hazardous material regulations, the “Lithium D Cell” battery has to be purchased separately by the user. We are

unable to re-sell this type of the battery directly to the consumer. However, you are able to use this type of the battery with our

ARC station. The internal power connector receptacle installed in your ARC station is compliant with the power socket of the

Tadiran TL-5930/F lithium ‘D’ cell battery. No modifications to the power connector is needed and the fully charged battery

can be connected directly to ARC station.

For your consideration, the ‘D’ size Lithium Battery, suggested as a long duration battery option, is the subject of a Federal

regulations under the U.S. Department Of Transportation. The Lithium type batteries classified as a ‘Class 9 hazardous

material’ and must be transported accordingly. The improper handling and shipping such materials is a subject of significant

fines as mentioned in above regulations. Please take all necessary precautions to comply with your local state and federal

regulations when considering purchase of Lithium batteries.

3.1 Other Battery Configurations:

If your specific application of the ARC station requires a different battery configuration, then please
feel free to call us at Desert Start Systems

+1(831) 384-8000

. We will gladly assist you and try to

accommodate your specific requirements to power the ARC station.

3.2 Battery Installation

Once you have decided what battery configuration option is best suited for your specific application,
please follow this procedure to install the batteries of your choice.

STEP 1:

Using a 3/32” Allen wrench, loosen and remove six (6) screws located at the top of the ARC station
along the edge of the sonar transducer end-cap.

Содержание Acoustic Release Control System




































































Результаты поиска

Содержание Acoustic Release Control System

Отзывы:

Похожие инструкции для Acoustic Release Control System

Бренды по названию

Популярные бренды

Desert Star Acoustic Release Control System, Руководство пользователя

Результаты поиска

Содержание Acoustic Release Control System

Отзывы:

Похожие инструкции для Acoustic Release Control System

Бренды по названию

Популярные бренды