Desert Star Acoustic Release Control System страница 21 Скачать руководство пользователя | Manualshive

Страница: 21 / 67

background image

The standard power cable

The “PC” inlet facilities a USB connection for the link to the PC running the “Acoustic Release
Control” software.

The GPS inlet serves as a communication link to optional GPS unit for automated recording of the
GPS coordinates at the time of the ARC unit(s) deployment. When the optional GPS unit is
connected, the “Acoustic Release Control” software records the coordinates in a log file along with
the unique Serial Number of the deployed ARC unit. The communication with the optional GPS unit
is done via USB interface (For more information on the GPS unit, please see the GPS unit section).

The power switch controls the power distribution of the STM surface station:

●

The neutral (middle) position of the switch is an “OFF” position.

●

When the switch is flipped “up” - this is “ON” position and STM surface station is powered
on.

●

When power switch is flipped “down” - this is a charging mode, STM surface station does
not receives power, and only battery charging circuits are energized.

«
...
19
20
21
22
23
...
»

Содержание Acoustic Release Control System




































































Отзывы:

Нет отзывов

Похожие инструкции для Acoustic Release Control System

Venatech IV LF01162U

Бренд: Life form Страницы: 4

Бренд: KOKEN Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды