63
2.2.5 Unit Revision
The Unit Revision Screen shows the version of the application program that is running along with the
release date of the software (Figure 81). This information should be communicated to Desert Aire in
the event a service call is necessary.
Figure 81
To return to the MAIN MENU, press the
Esc
key.
2.3 Alarms
Alarms are either Automatic Reset or Manual Reset. Automatic reset alarms are alarms that allow the unit
and/or circuit to return to operation once the operating parameters has been returned to acceptable
operating conditions. The unit and/or circuit will restart automatically; however, the red Alarm LED will remain
illuminated until acknowledged to alert the operator the alarm occurred. Manual Reset Alarms are alarms that
stop the unit and/or circuit and do not restart until the alarm is acknowledged and the alarm condition is
reset manually on the Alarm screen. The red Alarm LED will stay illuminated until the alarm is acknowledged
AND the alarm condition is reset.
2.3.1 Alarm Screen
The ALARM MENU can be accessed anytime by pressing the
ALARM
button. The main alarm screen
includes the instructions for viewing and resetting the alarms, as well as a means to access the alarm
history page. Pressing the
ENTER
button while viewing this alarm screen or the active alarm will
reset any alarm that has returned to its safe state. Any active alarm can be viewed by pressing the
DOWN
key from this page. Only active alarms are shown. To view the Alarm History Screen, press
the
ALARM
button.
Desert Aire - CM3510 Manual
Содержание CM3510 Series
