Desert Aire CM3510 Series Скачать руководство пользователя страница 58

Страница: 58 / 80

Pressing the

DOWN

key from this screen will show the next Airflow PID screen.

The OUTSIDE AIR DAMPER screen will be shown any time an exhaust option has

been selected in the Factory Configuration. This screen allows the Outside Air

Damper PID Gain (or Proportional Band), Reset (or Integral) and Rate (or Derivative)

to be modified for loop tuning. The range of the Gain is 0 to 32767. The range of the

Reset is 0 to 999. The range of the Rate is 0 to 999. The range of the Rate is 0 to

999. To modify these set points, press the

ENTER

key and use the arrow keys until

the desired setting is shown. Pressing the

ENTER

key will now change the set point.

The current O/A Set point, the actual O/A differential pressure and the damper

position are displayed at the bottom of this screen for reference.

Figure 73

To return to the Airflow Menu, press the

Esc

key.

Pressing the

DOWN

key from this screen will show the next Airflow PID screen.

The COOL EXHAUST DAMPER screen will be shown any time the extended OA

box has been selected in the Factory Configuration. This screen allows the Cool Air

Exhaust Damper PID Gain (or Proportional Band), Reset (or Integral), Rate

(or Derivative) and Set point to be modified for loop tuning. The range of the Gain is

0 to 32767. The range of the Reset is 0 to 999. The range of the Rate is 0 to 999.

The range of the Set point is from 0.0”wc to 1.999”wc. To modify these set points,

press the

ENTER

key and use the arrow keys until the desired setting is shown.

Pressing the

ENTER

key will now change the set point. The actual Exhaust

differential air pressure and the damper position are displayed at the bottom of

this screen for reference.

Desert Aire - CM3510 Manual

Содержание CM3510 Series

















































































Результаты поиска

Содержание CM3510 Series

Отзывы:

Похожие инструкции для CM3510 Series

Бренды по названию

Популярные бренды

Desert Aire CM3510 Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание CM3510 Series

Отзывы:

Похожие инструкции для CM3510 Series

Бренды по названию

Популярные бренды