- 12 -
Changing the Gobo – Projection Motif
1. Switch off the projection light. Wait and allow the area to cool down.
2. Remove the lampshade from one side. Carefully slide the lampshade out of the housing and lay it
to one side.
3. From underneath, push the Gobo – Projection Motif from the Gobo retainer with your finger. Take
the Gobo, together with the spring ring, carefully out of the Gobo retainer from the top. The black
spacer needs to remain inside the Gobo retainer.
4. Put the new Gobo into the Gobo retainer with its layer or filter side up (see Fig. 11a). Metal Gobos
do not have a layer or filter side and can be inserted any way round. If the motif is meant to be
projected mirror-inverted, the Gobo needs to be inserted the other way round.
5. Put the spring ring inside the Gobo retainer, so that the Gobo cannot fall out (see Fig.
11
b).
6. Make sure that the Gobo has not tilted inside the Gobo retainer (irregularly focused projection)
(see Fig.
11
c).
7. Switch on the projector light, adjust the projected motif and optimise the focus as necessary (see
page 11).
8. Carefully slide the lampshade back into the housing. (see Fig.
13
).
Fig. 11: Changing the motif
a b
c
Содержание bil
Страница 1: ...Reference Manual 115V ...
Страница 2: ... 2 Illustration 1 ...
