Derksen bil, Справочное руководство

Страница: 10 / 20

- 10 -
Setup and use
Switch on the projection lamp when the transformer housing has been closed and the lighting element
has been inserted. The projection can only be adjusted with the lamp switched on. Do not touch the
lighting element when the lamp is switched on, as it becomes very hot.
Adjusting the lamp
The projection lamp may be set up in a vertical/ horizontal position, or at an angel. When adjusting the
lamp, it needs to be synchronised with the room’s design and illumination concept. In order to change
the angle of the dismounted projection lamp, turn both cable retainers into the desired position (see
Fig. 8).
Fig . 8: Adjusting the lamp
Inserting the deflection mirror
The deflection mirror redirects the projection at an angle of 90° and can be rotated by 360°. By using
the deflection mirror, a lamp that has been mounted vertically can project in the horizontal direction,
e.g. on to a wall.
1. Set the mirror’s retainer ring in front of the projection lamp’s beam at an angle.
2. Push the retainer ring downwards, until it clicks in firmly.
3. Turn the deflection mirror around the lamp’s longitudinal axis, until the projection appears at the
right spot.
Fig. 9: Inserting the deflection mirror
1 2 3
W