SZG CONTROLLER 6 - ENGLISH
36
11.12
User
The data for up to 10 different users can be registered. You can switch between users in the menu. Press
the buttons
and
to select the required user number in the menu section USER. The current user
number is marked by an asterisk(*).
You can also switch between users using the optional RFID interface.
In the standard display screen the number of the current user is displayed in the upper right-hand corner.
11.13
Times
11.13.1 Min. driver time
The minimum driver time is the minimum time the screwdriver must run before the controller activates the
inlet cycle.
Minimum time:
0
sec.
Maximum time:
5,0
sec.
Steps:
0,1
sec.
11.13.2 New cycle delay
The new cycle delay is the length of time between the moment the screwdriver switches off and the
beginning of the separation and feeding process of the next feed part.
Minimum time:
0
sec.
Maximum time:
2,0
sec.
Steps:
0,1
sec.
11.13.3 Sep. forward
The separator forward time is the length of time the separator stays in inlet position.
Minimum time:
0,1
sec.
Maximum time:
10,0
sec.
Steps:
0,1
sec.
11.13.4 Air-push delay
The air-push delay is the length of time from the activation of the valve moving the separator forward to inlet
position to the activation of the valve for the air push.
Minimum time:
0
sec.
Maximum time:
5,0
sec.
Steps:
0,1
sec.
11.13.5 Part air-push
The part air-push is the length of time the valve is open for the air push. The part air push allows adjustment
of the reload procedure to correspond with the length of the feed hose. The part air-push must be increased
when using long feed hoses or when the air-push is on a low setting. When using a shorter hose or strong air
push then the part air-push time can be decreased.
Minimum time :
0,1
sec.
Maximum time:
5,0
sec.
Steps:
0,1
sec.
Содержание SZG Controller 6
Страница 47: ...SZG CONTROLLER 6 ENGLISH 47 15 Notizen Notes...
