Deprag SZG Controller 6, Руководство по эксплуатации

Страница: 27 / 48

SZG CONTROLLER 6 - ENGLISH
27
8 ENGLISH - Introduction
The electronic sequence controller carries out all necessary controller tasks for the operation of the feeder
series 6. It is designed for optimal setting of the program sequence via the simple integrated menu for any
application.
To optimise the feed part cycle essentially the following points are decisive:
•
Part time relative to part
•
Length of the feed part
•
Length of the feed hose
•
Behaviour of the parts in bowl
•
Working pace of the operator
The feed capacity in the bowl is kept constant by a strain gauge sensor and phase cutting angle controller.
This automatically compensates the varying fill level, temperature variations, etc. a soft start of the vibratory
bowl
is optional.
Different time settings can be fixed for up to 10 users. Switch between operators via the menu or using
RFID.
The controller has wide voltage input of 100-260V / 50/60Hz. Manual conversion between 230V and 115V is
not necessary.
The power pack is sustained short circuit proof.
The controller is switched on or off via the flip switch on the front of the machine. An LED displays the power
status.
Bild 17: Feeder series 6 with optional RFID
The controller for the feeder series 6 is available for the following versions:
•
1611, 1622: Hand feeders with single spiral and double spiral
•
0611-EP, 0622-EP: Stationary machines with single spiral and double spiral
•
0611-2-EP, 0611-3-EP, 0611-4-EP: Stationary machine with single spiral and double/triple/quadruple
distributor
•
06xx-0: Version 0
•
06xx-P: Version P
•
As well as linear conveyor