42
icture 4
P
9: Instantaneous value display
art of
a from 0 to 100 N·cm is shown as red/brown.
he red area marks the last 10 % of the measurement area (see
Picture 49:
The green area marks the measurement range. The red/brown area is below the st
the measurement range. For example the measurement range for DEPRAG sensor
MP7DMS is from 100-700 N·cm. The are
T
).
The measurement range of sensors from other manufacturers is
Therefore in this case the red/brown area is left out. Please note that the
results
NOTE
not known.
outside the measurement range are not reliable!
Click ON to start measurement.
During measurement the current value is shown by the red indicator on the analogue
device and also simultaneously as a digital value in the field “Current Torque”.
Click OFF to end the measurement. In the fields Neg. Maximum and Pos. Maximum the
measured maximum values are shown in negative and positive rotational directions.
Click RESET to reset all values back to 0.
Click on CLOSE to leave the window.