39
Picture 44: CMK settings
In the section <Adjust Limits> the limit values can be entered as an absolute value in
relation to the average of the measurement.
Picture 45: Absolute value for upper and lower limits
In the section <Adjust Tolerance> the limit values can be changed in percentages
related to the average of the measurements. The value can be either directly entered or
altered using the arrow keys. The standard setting is 15%.
Picture 46: Deviation from average for upper and lower limits in percentage
NOTE
If values are entered for the lower and upper limits then the tolerance is
disregarded. If the tolerance is altered, the values for upper and lower limits
are set back to zero.
Close the window with OK to accept changes. Click on CLOSE to leave the window
on
ove the chosen row from the list and the results are
calculated.
without making changes.
11.3.2 Delete Measurement Values
Individual measurement values can be deleted by clicking with the right mouse butt
on the row to be deleted. A pop up menu opens in which Delete or Cancel can be
chosen. Choose Delete to rem
re