27
Picture 18: popup-window for setting the limit values
measurement
IMPORTANT
Wait to do the next measurement until
- - -
is shown in the field
MEASUREMENT. Only then is the ME6000 ready for the next
.
The first measurement determines the direction of all following measurements of the
series, i.e. when the first measurement is in the positive rotation then all measurements
ith negative rotation a
re ignored and only measurements with positive rotation are
d
w
displayed.
Click OFF to cancel the complete series. An individually measurement can be cancelle
by double-clicking with the right mouse button (see Note automatic measurement).
oosing series measurement
Picture 19: Ch
n contrast to automatic measurement, the method series measurement carries out a
I
preset amount of measurements. The amount is set in the section <Settings> (see also
Additional Settings
). Once all measurements of the series have been carried out the
series measurement is automatically ended.
Picture 20: Setting the amount of measurements within a series