Denyo DCA-600P, Инструкция по эксплуатации

Страница: 40 / 58

- 38 -
3-6 During operation
1. Periodically check that
• Indications of the engine monitor, indicator lamps and meters are normal.
• Oil, fuel and cooling water do not spill.
• The engine exhaust color is normal. There are no unusual sound and vibration.
• A light load is not applied for a long time. Otherwise, the engine output might drop.
• Each single-phase load is connected in balance whenever it is used.
• The engine oil level checked daily is normal. Refill if necessary.
[ NOTE ]
: If the circuit breakers are tripped during operation, switch off the load and stop the
engine. Check and, if necessary, decrease the load.
3-7 Stopping
3-7-1 Stopping method
1. Switch the load circuit breakers to OFF.
2. Switch the generator circuit breaker to OFF.
3. Let the engine run for about 5 minutes to cool down.
4. Stop the engine by turning the key to STOP.
5. If the machine is not used any longer, withdraw and keep the key.
3-7-2 Emergency stop
To stop the engine in an emergency, press the emergency stop button.
3-7-3 Protection device
Protection devices and emergency stop devices are provided for protection of the machine against
trouble during operation.
When the warning lamp lights, stop the engine immediately. Check and remove the cause of
trouble.