Denyo DCA-600P, Инструкция по эксплуатации

Страница: 22 / 58

- 20 -
2. TRANSPORTATION, STORAGE AND INSTALLATION
2-1 Safety precautions for transportation, storage and installation
WARNING
• When lifting or transporting the machine, use only appropriate devices which comply with
the local safety codes and regulations.
• When lifting the machine, use the hanger of base.
• Do not resort to rope winding because it is not strong enough.
• Before lifting, close and fix covers and other moving parts and clear away the machine
interior and top.
• Do not slip under a lifted machine.
• The electrical connections shall comply with the local codes.
• Earth the machine properly.
• The engine exhaust gas is lethal and toxic. Do not operate in places where the aeration is
poor. Discharge the exhaust sufficiently by a ventilating system. Never direct the engine
exhaust towards passers-by.
• Do not operate the machine in an atmosphere containing toxic or combustible gas. Otherwise,
fire or explosion might occur in the machine. (Example: Near volatilizing paint solvent.)
• Fuel and oil are combustible and undiluted anti-freeze solution is inflammable. Do not
smoke while handling or refilling them. Do not get fire or heated objects near them. Do not
spill or leave fuel, oil, anti-freeze solution or cleansing agent in or around the machine.
If spilled, be sure to wipe off properly.
• If necessary, provide a spark arrestor to trap incendiary exhaust sparks.
CAUTION
• Install the machine on a well ventilated, horizontal, flat, dry and solid floor. If the floor is
not horizontal enough to keep the machine leveled, consult your sales distributor. When
installing the machine on a trailer, fasten the trailer and fix the wheels by stoppers.
• Do not remove or unduly modify safety devices, guards, covers or insulating materials from
the machine.
• When servicing batteries, always wear protecting clothing and glasses. The battery electrolyte is
a diluted sulphuric acid which can cause severe burns. Get it away from eye, skin and clothing.
• When charging batteries, an explosive gas forms above the cells and escapes through the
vents. Do not smoke near batteries just after having been charged. Never make or break
live circuits or battery terminals, because a spark usually occurs.
• Before checking the machine, stop the engine and wait for at least 10 minutes so that it will
cool down completely. If done while running or immediately after shutdown, you might get
burnt or injured.