Pull off Catch-Tray with clipped
pieces from the S.
For loosening of Catch-Tray, open
S as widely as possible.
6
7
Clip any part of the projecting end
of the AUTO-LOCK LOOP.
5
Make sure that the Catch-Tray
is properly connected to the
S.
Important:
Turn instrument and
check that there is no gap between
Catch-Tray and S.
Gap leads to malfunction of the
S and Catch-Tray cannot
prevent clipped loop pieces from
the oral cavity.
1
2
3
4
AutoMatrix
®
S &
Catch Tray
Illustrated Technique Guide
Attach Catch-Tray from the left
side then turn 90° in the
instrument axis.
Manufactured by:
DENTSPLY DT GmbH,
De-Trey-Str. 1
78467 Konstanz
GERMANY
© DENTSPLY DT 2014-08-12
www.dentsply.eu
www.dentsply.com
Caution, consult
instructions for use
AutoMatrix
®
Snippers
+
& Catch-Tray
Illustrated Technique Guide
Cover-Layout-3.indd 2
13.08.14 14:51