Dentsply Sirona CEREC AC Скачать руководство пользователя

Страница: 12 / 92

4 Safety
4.1 Basic safety information

Dentsply Sirona

Operating Instructions CEREC AC Connect

64 32 087 D3492

D3492.201.07.24.02 07.2018

Safety

4.1

Basic safety information

4.1.1

Prerequisites

NOTE

Important information on building installation

The building installation must be performed by a qualified expert in
compliance with the national regulations. DIN VDE 0100-710 applies
in Germany.

NOTE

Restrictions regarding installation site

The system is not intended for operation in areas subject to explosion
hazards.

NOTE

Do not damage the unit!

The unit can be damaged if opened improperly.

It is expressly prohibited to open the unit with tools!

4.1.2

Connecting the unit

Perform connection by following the directions given in the present
operating instructions.

4.1.3

General safety information

CAUTION

Do not damage the monitor

DO NOT touch the LCD screen with sharp or pointed objects.

If the LCD monitor is damaged (e.g. the glass screen is broken),
prevent any leaking liquid from coming into contact with your skin,
mucous membranes (eyes, mouth), or foodstuffs and be careful not to
inhale any escaping vapors.

Rinse any parts of your body or items of clothing already
contaminated by the liquid with ample amounts of water and soap.

CAUTION

Note on the prevention, recognition, and elimination of unintended
electromagnetic effects:

The CEREC AC acquisition unit is Class B equipment (classified
according to CISPR 11, EN 60601-1-2: 2007 based on IEC
60601-1-2:2007 and A1:2004).

This system may be operated in a residential area provided that it is
used under the responsibility of a medical specialist.

Содержание CEREC AC





























































































Результаты поиска

Содержание CEREC AC

Отзывы:

Похожие инструкции для CEREC AC

Бренды по названию

Популярные бренды

Dentsply Sirona CEREC AC, Руководство по эксплуатации

Результаты поиска

Содержание CEREC AC

Отзывы:

Похожие инструкции для CEREC AC

Бренды по названию

Популярные бренды