22
CT Values
The
CT Values
screen allows the type of
current transformer (CT) and the amperage
rating to be changed.
Set
– Select the checkbox to send the settings
to the meter.
Element
– Indicator for the meter to send
settings to. The PowerScout 3 is a single meter
so only Element A is available.
CT Type
– Use the drop-down menu to select
the type of CT attached to the PowerScout.
CT Amperage Rating
– Enter the amperage
rating.
Read Settings
button – Reads the values from
the PowerScout.
Send Settings
button – Sends the settings
specified in ViewPoint to the meter with the
Set checkbox selected.
Read/Write Registers
The
Read/Write Registers
screen provides
diagnostic and special configuration options,
allowing the changing or viewing of the value
of any PowerScout registers. Its use is not
required for a basic setup.
Element
- The PowerScout 3 is a single meter
and cannot be changed from Element A.
Read Modbus Register
- Reads a specified
modbus register by typing the register address
in the box and pressing the button. Use the
Copy
button to copy the register address to
the box next to the
Set Modbus Register
button. The
?
button provides a list of
common registers. Refer to the
Register Picker
menu below.
Set Modbus Register
– Enter a register
address to write to. In the
To Value
box, type
the value to write to the register address. The
?
button provides a list of common registers.
Содержание PowerScout 3
