9
Use of USB Direct Cable
Connect the Direct Cable to a power adaptor such as a USB charger or a USB port in a host computer.
It may take long to charge to full depending on the power supply capacity of the host computer.
Make sure that the power adaptor has the specified output rating listed below.
Use a USB charger with the specified output rating.
Use a USB charger that is compliant or compatible with the USB-IF standard, Battery Charging Specification Rev
1.2.Failure to follow instruction may cause smoke and or fire.
Power adapter output rating
Specifications
Voltage 5 +/- 0.25 (V) DC
Current Min 2.0 A
1
Fasten the USB Direct Cable to the lower
end of the scanner.
Take care so as not to get a strap
entangled in the cable when attaching or
removing a direct cable.
2
When removing, do not pull a cable.
