12
Paring
Implement the pairing in the slave mode as described below.
Paring by using the target setting application
[STEP1] Set host target
SP1 Power on. Then, Reading the QR code on the back side of SP1 from the connection target setting
application installed on the host terminal, and register the host terminal information.
[STEP2] Bluetooth enable
Press paring button for one second or more to enable the pairing. Then, the pairing indicator blinks in
blue. Connecting to the host terminal, the pairing indicator illuminate continuously.
1
Enable the Bluetooth
®
function of the host terminal to enable the detection.
For details, refer to the User's Manual of the host terminal.
2
Power on the scanner, and the pairing indicator will blink in blue and the Bluetooth
®
function will be enabled a little later. If it is not enabled, press the pairing button for one
second or more to enable the pairing.
3
Select this scanner from the device list of the host terminal to implement pairing.
As for iOS terminal, the pairing indicator blinks in the fast cycle.
The device name of a scanner is displayed as "SP1-XXXXXX". XXXXXX is the serial
number of the scanner and the serial number is indicated in the rating plate.
4
Connect this product by implementing the user application of the host terminal.
Then, the pairing indicator illuminates in blue.
