Denso QB30-SR, Руководство пользователя

Страница: 33 / 139

START
“ESTART” transmission
8.1.2.2 Verification master data designation
This is set using the commands, or configuration software (QB Setting). Commands used for verification master
designation are as follows.
Command Details
MEM#nn
Verification master designation command
nn = 00: No verification master designation (all masters and n:n verification)
nn = 01 - 50: Master no. nn verification master and 1:n verification
8.1.2.3 Verification digit position designation
This is set using the commands, menu, or configuration software (QB Setting). All digits will be compared if no verification
digit position is designated. Only the designated digit position is compared if a verification digit position is designated, and the
verification master and number of digits (data length) in the scanned code data are ignored. Unlike Scan entry mode, however,
the verification master is always used to perform a verification from the first digit. If the number of digits in the verification
master is fewer than the number of digits being compared, it is treated as an unregistered condition. If the number of digits in
the verification master is the same or greater than the number of digits being compared, the excess data is ignored.
[Example in which verification digit position designation is used]
Verification master data (4 digits):
3456
Scanned code data (11 digits): 12345678901
Verification digit pos. setting: 3rd to 6th digit compared. (Verified digit qty: 4)
Verification result output:
OK
No
END
Registration
Completed?
Master registration command transmission
“EEND” transmission
22