Denso DN-DSM, Руководство пользователя, Страница: 35 / 39

15
Download the "DPKPG.dsm" program file required for the update to the
computer
Download from the following web page.
https://www.denso.com/global/en/products-and-services/automotive-service-parts-and-accessories/dn-dsm/
Save the downloaded "DPKPG.dsm" program file in the "reprog" folder of
the SD memory card
dsm reprog
DPKPG.dsm
Folder Folder
File
•
When the power is turned on, the main unit reads the SD memory card and starts the version update.
• The main unit LED flashes (0.5 second intervals) during the version update. The product may restart sev-
eral times during the update.
• When the main unit LED stops flashing after restarting, the version update is completed.
•
When the version update is completed, the software starts operating automatically.
• The version update may take several minutes to complete.
ADVICE
Insert into the SD memory card slot on the main unit
Turn on the power
• Stop the vehicle in a safe place before updating the software. Do not drive while the software is updating.
• The functions of this product cannot be used while the software is updating.
• Confirm that the SD memory card is not write protected.
• Do not turn the power OFF during a version update. Also, do not remove the SD memory card at this time
under any circumstances.
• A notification sound (two long beeps) is emitted if an abnormality occurs while the software is updating. In
this case, turn the power OFF and repeat from step [ ]. (There is a possibility that the program file has
been deleted due to a failed version update.) If the abnormality occurs again, contact the sales dealer from
which the product was purchased.
ATTENTION
The software can be updated to the latest version. For details on updating the software, check the DENSO
website.
To update the software, a computer must be used to save the program on the SD memory card.
Updating the Software