Denso DN-DSM, Руководство пользователя, Страница: 34 / 39

14
Volume Switch Process Notification Sound
Less than 5 seconds
● Sets the volume in 6 steps (mute, 1 to 5).
● The volume increases by one step each time the switch is
pressed. The step after volume 5 (maximum) is mute.
One short beep
5 seconds or more, but less than 20 seconds Forced reset of the driver status monitor One long beep
•
If the volume is set to "Mute" when the power is turned off, the volume is set at volume 1 the next time the
power supply is turned on.
ADVICE
Volume settings and a forced reset can be performed with the volume switch. The operation differs according
to the time that the volume switch is pressed.
Volume Setting and Resetting
•
Press the volume switch with the hex key included with the product, pressing the hex key in a straight direc-
tion. Do not press with a pointed object or at a slant.
ATTENTION
Checking the Recorded Data
Operation record data such as logs and images recorded on the main unit can be checked with the DN-DSM
manager.
•
When the upper limit of the SD memory card's storage capacity is reached (about 1 month of data), this product de-
letes the oldest data and then saves (overwrites) the new data.Use the DN -DSM manager to save the data on the
computer as necessary. Also, note that the upper limit depends on the operation status.
• The DN-DSM manager installer is located on the included SD memory card.
• For the installation method and operations, see the DN-DSM Manager Owner's Manual.
• If the time displayed in the operation record differs greatly from the actual time, reset the clock.
ATTENTION
ADVICE
Alarm Notifications
Abnormality Notifications
Notification Content Voice Notification/Notification Sound Camera LED Main Unit LED
During an Abnormality Two long beeps Flashing (0.25 second intervals) Flashing (0.25 second intervals)
SD Memory CardDuring abnormal opera-
tion related to SD memory card
SD card error is detected. Please check the
SD card.
Flashing (0.25 sec-
ond intervals)
Flashing (0.25 sec-
ond intervals)
Notification Content Voice Notification/Notification Sound Camera LED Main Unit LED Remarks
Inattentive Driving Alarm Please pay attention to the front.
Flashing
(0.5 second
intervals)
Lit
T h e v o i c e
notification or
notification
sound can
be disabled
in the opera-
tion settings.
Poor Driving Posture Alarm Please check your driving posture.
Sleep Alarm Let’s take a break.
Drowsiness Alarm You look tired. How about taking a break?
Drowsiness Check (Status Detection)
Are you tired? If you are not, please
raise your hand toward the camera.
Drowsiness Check (Random)
• For the operation settings, see the DN-DSM Manager Owner's Manual.
ADVICE